DURAVIT DuraSystem WD6004 000 000 Notice De Montage page 7

Power supply
Max. rated power
Circuit breaker
RCCB
DANGER
Risk of fatal electric shock
> Disconnect electrical components from the
power supply before the installation.
> Check that all components are de-
energised.
> Prevent the power supply from being
switched on accidentally.
Pre-installation/planning
> Plan a position for the concealed box:
• within 1700 mm (diagram A)
• outside the protection zones 0 – 2 (dia-
gram B)
> Install a permanent power supply line
there:
• Install a separate circuit breaker and
residual-current circuit breaker (RCCB)
upstream
• Connect all pole disconnector mains
switches upstream located outside the
protection zones 0 – 2 (diagram B)
–
3 7
Mounting the installation set
> Position the concealed box at the
designated point.
–
17 20
Connecting the toilet frame
> Connect the supply line to the
transformer.
100 – 240 V, 50 – 60 Hz
4 W
I = 16 A
N
I 30 mA
N
A
0
Safety areas in accordance with
DIN VDE 0100-701
B
0
6 0
1
0
* or the height of the highest shower head
/ water outlet that is permanently installed,
depending on which is higher
0-1700
6 0
0
2
7
MAL_57205/18.02.1