Whirlpool WDP370PAHB Instructions D'installation page 5

Attach faucet adapter – internal threads
Thick washer
Thin washer
Screens
Faucet adapter
Insert the 2 screens, the thin washer, and then the thick washer
from the faucet adapter kit into the faucet adapter. Attach the
adapter onto the end of the faucet.
NOTE: Use both washers.
Connecting to Water and Electrical Supply
Run water at the faucet until it is hot. Turn off the water.
7.
Check hose connection
Pull the hoses out of their storage compartment on the back of
the dishwasher.
NOTE: Make sure the hoses are not kinked or twisted. Kinked
hoses reduce washing performance.
8.
Connect hose to faucet
Pull down on the locking collar while lifting the hose connector
onto the faucet adapter. When the connector snaps into place,
release the locking collar. Turn the hot water on slowly until it is
all the way on.
9.
Plug into a grounded 3 prong outlet.
5