Kränzle SSM 430 Manuel D'utilisation Et Entretien page 37

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
7.1.a - Language setting
-
Enter the parameter setting menu until
the following screen appears:
general
sets
Language
selection:
min: 0
-
Select the language
then press the buttons (51) "
firm your selection.
7.1.b - Battery type setting
-
Enter the parameter setting menu until
the following screen appears:
general
sets
battery
selection:
min: 0
-
Select the battery type by using the but-
tons (47a)and (47b), then press the but-
ton (51) "
" to confirm your selection;
GEL = Gel battery
AGM = AGM battery
WET = ACID battery
7.1.c - Brightness and contrast set-
ting
-
Enter the parameter setting menu until
the following screen appears:
general
sets
display
bightness:
min: 0
-
Set the display brightness by selecting a
value from "0 to 10" with the buttons (47a)
and (47b), then press the button (52) "
" to go to the contrast settings.
italiano
max: 3
(47a) and (47b),
" to con-
gel 24
max: 3
5
max: 10
display
tune:
min: 5
-
Set the display contrast by selecting
a value from "5 to 50" with the buttons
(47a) and (47b), then press the button
(51) "
" to confirm your selection.
8.1 DISPLAY (Fig. 10)
The following pictograms appear on the dis-
play:
"A"
= Battery
Indicates the battery charge status;
"A1"
= battery charged;
"A2"
= battery discharged.
= traction speed (if present)
The movement speed can be changed from
"0" to the maximum speed in 5 steps, using
buttons "
" and "
crease the speed.
"
"= reverse (if present)
This appears on the display when selecting
the button "
performed; when the button is released the
pictogram disappears.
"
" = Aspirator operating
This appears on the display when selecting
the button "
is operating; when repressing the button "
" to stop operation, the pictogram will
flash for a few seconds and disappears when
the aspirator stops.
"
"= Silent operation
Vacuum in operation.
This appears on the display when selecting
the button "
EN-10
general
sets
30
max: 50
" to increase or de-
" and a reverse operation is
" indicating that the aspirator
" indicating that the aspirator

Publicité

Table des Matières
loading

Table des Matières