Troubleshooting - Panasonic NR-B29SG2 Mode D'emploi

Your fridge warns you if the temperatures for cooler and freezer are in improper levels or when a problem occurs in the appliance.
Warning codes are displayed in the Fridge/ Freezer temperature display.
Warning codes Meaning
Sr Failure/Warning
LF Freezer compartment is
not cold enough.
LC Refrigerator
compartment is not cold
enough.
LF and LC Not cold enough.
HC Refrigerator
compartment is too
cold.
LOPO Low voltage
Details and countermeasures
There is/are some part(s) out of order or there is a failure in cooling
process.
• Call Service for assistance as soon as possible.
This caution will be seen especially after long term of power failure.
1. Do not freeze the foods that are thaw and use in short time period.
2. Set the freezer temperature to colder values or set the super freeze, until
the compartment gets to normal temperature.
3. Do not put fresh food until this failure is off.
Ideal temperature for refrigerator compartment is +4°C. If you see this
warning your foods have risk of spoiling.
1. Set the refrigerator temperature to colder values or set the super cooling
mode until the compartment gets to normal temperature.
2. Do not open the door often until this failure is off.
It is the combination of LF and LC error type.
• You will see this failure when first starting the appliance. It will be off after
the compartments get normal temperature.
The foods start to freeze because of the too much cold temperature.
1. Check if the super cooling mode is on.
2. Decrease the refrigerator temperature values.
When the power supply gets lower than 170 V, the appliance gets to steady
position.
• This is not a failure. This prevents any damages on the compressor. This
warning will be off after the voltage gets required level.

Troubleshooting

17 17