Wireless module
Technology used:
Frequencies:
Max RF power output:
FCC ID: 2ACHL-A10STACD, 2ACHL-A10STA3G, 2ACHL-AIR104G
IC: 9103A-A10STA3G, 9103A-AIR104G
The AirCurve 10 device complies with FCC Rules and Industry Canada Rules.
The AirCurve 10 device should be used at a minimum distance of 0.8" (2 cm) from the body during operation.
Additional information regarding the FCC Rules and IC compliance for this device can be found on
www.resmed.com/downloads/devices
Operating pressure range
S, ST, T, PAC, iVAPS:
CPAP
Supplemental oxygen
Maximum flow:
Pneumatic flow path
Design life
Device, power supply unit:
Cleanable water tub:
Standard water tub, air tubing:
General
The patient is an intended operator.
Operator position
The device is designed to be operated within arm's length. An operator should position their line of sight within an angle of
30 degrees from a plane perpendicular to the screen.
CDMA (USA only),
4G (USA and Canada)
3G,
2G
CDMA (800/1900 MHz)
4G (700/850/1900 Mhz)
3G (850/900/1700/1900/2100 MHz)
2G (850/900/1800/1900 MHz)
CDMA 24.5 dBm
4G 23.0 dBm
3G 24.0 dBm
2G 33.0 dBm (850/900MHz) 30,0 dBm (1800/1900 MHz)
3 to 30 cm H
O
2
4 to 20 cm H
O
2
15 L/min (S, ST, T, PAC, CPAP), 4 L/min (iVAPS)
1. Flow sensor
2. Blower
3. Pressure sensor
4. Mask
5. Air tubing
6. Water tub
7. Device
8. Inlet filter
5 years
2.5 years
6 months
English
21