Luminice™ Reminder Setup - Manitowoc LuminIce ID0302A Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation Instructions
LUMINICE™ REMINDER SETUP
Perform the procedure below to display a change-bulb
reminder every 12 months. Complete display panel
navigation is available in the Indigo™ ice machine
Installation Use and Care Manual. Publications for all
Manitowoc equipment are available on our website
www.manitowocice.com.
1. From the Set-Up menu, use the Down arrow to
highlight LuminIce™.
2. Press the Checkmark. On this screen, you can
choose to turn the reminder to AUTO or OFF by
highlighting your choice and pressing the
Checkmark. Selecting one will deselect the other.
3. When the check reflects your preference, use the
Down arrow to navigate to Exit and press the
Checkmark. The display will return to the Set-Up
menu.
12
Section 2
Part Number 000008463 10/11

Publicité

Chapitres

Table des Matières
loading

Table des Matières