Berner 351975 Notice Originale page 12

OBJ_BUCH-2480-001.book Page 12 Friday, March 27, 2015 8:59 AM
Additional Safety and Work-
ing Instructions
 Dusts from materials such as lead-containing
coatings, some wood types, minerals and met-
al can be harmful to one's health and cause al-
lergic reactions, lead to respiratory infections
and/or cancer. Materials containing asbestos
may only be worked by specialists.
– Provide for good ventilation of the working
place.
– It is recommended to wear a P2 filter-class res-
pirator.
Observe the relevant regulations in your country for
the materials to be worked.
 Prevent dust accumulation at the workplace.
Dusts can easily ignite.
 The battery is supplied partially charged. To
ensure full battery capacity, completely
charge the battery in the battery charger be-
fore using for the first time.
 Read the operating instructions of the battery
charger.
 Apply the power tool to the screw only when it
is switched off. Rotating tool inserts can slip off.
 Adjust the gear switch only when the machine
is at a complete stop.
 Always push the gear selector through to the
stop. Otherwise, the machine can become dam-
aged.
 If the gear switch cannot be pushed to the
stop, turn the drill chuck a little.
The battery charge-control indicator consists of
three green LEDs, and indicates the charge condi-
tion of the battery for a few seconds when the
On/Off switch is pressed halfway or fully.
LED
Continuous lighting 3 x green
Continuous lighting 2 x green
Continuous lighting 1 x green
Flashing light 1 x green
To save energy, only switch the power tool on
when using it.
Symbols
The following symbols are important for reading
and understanding the operating instructions.
Please take note of the symbols and their meaning.
12 | English
The correct interpretation of the symbols will help
you to use the machine in a better and safer man-
ner.
Symbol
Capacity
≥ 2/3
≥ 1/3
< 1/3
Reserve
Meaning
BACD BL 10,8 V
Cordless Drill Driver
Grey-marked area: Handle
(insulated gripping surface)
Article number
Read all safety warnings and
all instructions
Before any work on the
machine itself, remove the
battery
Always wear ear protection
Next step of action
Movement direction
Reaction direction
Right/left rotation
Screwdriving
Drilling
Low speed
High speed
Switching On
Switching Off
1 609 92A 16P • 27.3.15