Télécharger Imprimer la page

BabyGo Car Seat + Isofix Instructions De Montage page 34

Masquer les pouces Voir aussi pour Car Seat + Isofix:

Publicité

Les langues disponibles

Les langues disponibles

Car Seat + Isofix
3. REMOVING AND REFITTING THE COVER (2)
Release the snap button one by one, you will take the seat cover off.
When the seat cover is washed you can put it back on again as well.
1
2
NOTICE
This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to Regulation
No. 44,04 series of amendments for general use in vehicles fitted with
ISOFIX anchorages systems.
It will fit vehicles with positions approved as ISOFIX positions (as detailed in
the vehicle handbook), depending on the category of the child seat and of
the fixture.
The mass group and the ISOFIX size class for which this device is intended
is: B1, E
This is a "Unicersal" child restraint. It is approved to Regulation No. 44,04
series of amendments for general use in vehicles fitted most, but not all, car
seats.
A correct fit is likely if the vehicle manufactutrer has declared in the vehicle
handbook that the vehicle is eapable of accepting a „Universal" child res-
traint for this age group.
This child restranint has classified as "Universal" under more stringent con-
ditions than those which applied to earlier designs which do not carry this
notice.
If in doubt,consult either the child restranint manufacturer or the retailer.
This child restraint is classified for „(Semi-Universal)" use and is suitable for
fixing intothe seat positions of the following cars:
CAR
FRONT
REAR
Outer
Centre
(For all vehicles equipped with ISOFIX) Yes
Yes
No
Seat positions in other cars may also be suitable to accept this child restraint,
if in doubt, consult either the child restraint manufacturer or the retailer.
34

Publicité

loading

Produits Connexes pour BabyGo Car Seat + Isofix