Télécharger Imprimer la page

BabyGo Car Seat + Isofix Instructions De Montage page 31

Masquer les pouces Voir aussi pour Car Seat + Isofix:

Publicité

Les langues disponibles

Les langues disponibles

Pull the ISOFIX connectors out at the both side of the seat, if it is in the
locked condition, unlock it and the indicators show in green. Aim at the low
anchors at the bottom of the seat (E-1, E-2, E-3).
Push the seat until they are locked, you'll hear „click" „click" (E-4).
Put the child seat on the vehicle seat, pull ISOFIX connectors out and lock
them on the vehicle anchors at the bottom of the seat.
You'll hear „click" and the indicators will turn in green.
Let your child sit in the seat and adjust the height of the headrest, make sure
it won't be too high or too low.
Pull the adult seat belts out and feed the diagonal section of the vehicle belt
through the upper belt guide (E-5, E-6).
Fasten the seat belt across your child. The lap section should rest on the
lap belt guides on each side of the child seat. Make sure the seat belt is not
twisted (E-7, E-8).
Buckle the adult seat belts to the anchorage of the vehilce seat.
Check the position of vehicle buckle, ensuring it is not being pulled around
the child seat onto the red belt guide.
Feed the diagonal section of the adult belt through the upper belt guide on
the opposite side to the buckle.
E- 1
E- 3
Car Seat + Isofix
E- 2
C-3
B-1
E- 4
31

Publicité

loading

Produits Connexes pour BabyGo Car Seat + Isofix