LENCO SCD-341BK Mode D'emploi page 11

FULL SCAN
Press the "ENTER" button to do full scan.
The full scan is used to perform a wide range search for DAB stations.
MANUAL TUNE
Press the "TUNE +/-" button to tune the Channel.
Press the "ENTER" button to confirm the selection.
DRC (DYNAMIC RANGE CONTROL)
DRC On or Off enables a degree of compensation for the differences in the dynamic
range between music on a radio station.
Press the "SKIP +/-" button to confirm the DRC off, low or high setting: (The asterisk
behind the option indicates the current setting.)
DRC off: No compensation applied DRC low: Medium compensation applied
DRC high: Maximum compensation applied
Press the "ENTER" button to confirm the selected DRC.
(This function will only work if the station supports this.)
PRUNE
Press the "SKIP +/-" button to choose "No" or "Yes".
Press the "ENTER" button to confirm the selected "No" or "Yes".
No: Return to the previous menu.
Yes: Remove invalid stations (stations with bad reception) form the station list.
SYSTEM
Press the "SKIP +/-" button to choose different modes
Press the "ENTER" button to confirm the selection.
SLEEP
Press "SKIP +/-" button to select shut of time (Options: Off, 15, 30, 45, 60 and 90
minutes).
Press the "ENTER" button to confirm the selection.
After the set time has elapsed, the device automatically switches to standby
*This function will activate the automatic shut-off mode.
TIME
Press the "SKIP +/-" button to choose one of the following setting options:
11