Iomega BrightStor ARCserve Installation Rapide page 3

Configuring an Iomega
1. Launch Device Configuration from the ARCserve Program group.
2. Select Windows Server (local machine only), then click Next.
3. Log in using the caroot account and password you selected.
4. Select Tape/Optical Library, then click Next.
5. If your Iomega drive has been connected properly, it will appear in the left-hand pane of
the Assign Devices window. If it does not appear in the left-hand pane, select Iomega RRD
from the right-hand pane, then click Assign. When the Iomega drive appears in the left-hand
pane, click Next.
NOTE: If your drive is already a Library Device, you do not need to click Auto Config. If you
do, ignore the error and continue.
NOTE: If you are unable to add a library device, make sure the Autoloader is online, then
restart the Device Configuration application (step 1). If the problem persists, power cycle
the autoloader and try again.
6. Select the Iomega drive and click Properties.
7. In the Properties screen, select Bar code reader installed if your drive has the optional bar
code reader. Leave other options unchecked. Click OK.
8. Click Next.
9. In the Advanced Settings screen, make sure that Library Quick Initialization is unchecked,
then click Next.
10. Review the configuration summary, then click Finish.
11. Click Exit to complete your configuration.
12. To perform your first backup, launch BrightStor ARCserve Backup. Iomega recommends that
you view the tutorial.
Disaster Recovery Tips
BrightStor ARCserve Backup uses the REV drive as a file system device. The software's Format and
Erase commands only affect BrightStor ARCserve Backup files, leaving all other data intact.
REV Loader: To perform a recovery from the REV Loader, you will need a copy of the REV System
Software installer (available on the Solutions CD or downloadable from iomega.com). When the
ARCServe Disaster Recovery Wizard requests 3rd party drivers, click the Install... button and browse
to the appropriate REV installer for your system. No restart is necessary. Click Finish to complete
the recovery process.
Before beginning a disaster recovery, allow the loader to scan the entire library. Beginning the
recovery before the scan is complete will cause an error. If this happens, restart the computer, then
begin the disaster recovery process again.
BrightStor ARCserve Backup Disaster Recovery does not update the status indicators and
percentages on all systems. To ensure the recovery is progressing, check the drive's activity light or
LCD. The software will prompt you when the backup is complete.
If your Iomega REV Autoloader has a bar code reader, it will scan the media for cartridges with bar
code labels. BrightStor ARCserve Backup will automatically track the media using the bar code
number.
REV Autoloader 1000
® ®
3