Neriox LDM60 Mode D'emploi page 15

15
Addition and subtraction functions
+ The current measurement result is added to the previous one
- The current measurement result is subtracted from the previous one, as shown in the figure below
Sequence of an addition / subtraction
1. Measurement → Press the +/- key → 2. Measurement → The result is displayed automatically
Saving and retrieving measurements
1. Measurement data is saved automatically. Briefly press the key
The display shows the screen as shown in the picture below.
2. The higher number (up to 20) indicates a more recent measurement
3. Use the + or - keys to scroll through the measurements
Error messages
Error code
Err 10
Err 15
Err 16
Err 18
Err 26
Brütsch/Rüegger Werkzeuge AG, Heinrich Stutz-Strasse 20, Postfach, CH-8902 Urdorf, Tel. +41 44 736 63 63, Fax +41 44 736 63 00, www.neriox.tools, sales@brw.ch
to display the saved data.
Possible cause
Battery too weak
Outside measuring range
Received signal too weak
Background brightness too high
Outside the display
Remedy
Replace batteries
Measurement within the measuring range
Use a bright target; keep device more stable
Use a dark coloured target