Important Information; Safety Warnings; Technical Specifications - Sure sense Microchip Reader Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14

Important information

PLEASE READ THE FOLLOWING INFORMATION CAREFULLY AND RETAIN THIS
MANUAL FOR FUTURE REFERENCE.
You can find the product code and serial number of the Microchip Reader on the inside of
the battery cover.
Please make sure you have all the parts listed on page 1.
To register this product's warranty visit: surepetcare.com/suresense-warranty
Only use the USB cable provided and do not insert any foreign objects into the product.
This product is not waterproof.
The reader requires two alkaline AA batteries, which should be inserted
and replaced with caution. Do not mix different types of batteries or new
and used batteries. If the unit is going to be unused for a long period, please
remove the batteries.

Safety warnings

This product uses RFID (Radio Frequency Identification) and therefore may cause
problems with sensitive electronic medical devices such as pacemakers and
monitors within a 1 metre radius.
Do not use this product if parts are missing, damaged or worn.
Keep small parts out of reach of children and animals. Children should not be
permitted to play with the SureSense Microchip Reader. It is not a toy and should not
be treated as such. However, the Microchip Reader can be used by children aged 8 years
and above and also by persons with reduced physical, sensory or mental capabilities as
long as they are supervised.

Technical specifications

Size:
136mm (L) x 63mm (W) x 29mm (H) (5 3/ 8 '' x 2 1/ 2 '' x 1 1/ 8 '')
Battery life:
6 months (Typical usage at 3 reads per day, with good
quality alkaline AA batteries)
Compatible microchips:
ISO FDX-B (15-digit)
Readable temperature range:
+33
C to +43
C (+91.4
o
o
If the Microchip Temperature doesn't fall within this range
an out of range symbol will be displayed, see page 5.
3
F to +109
F)
o
o
Maximum reading distance:
Up to 95mm (3 3/ 4 '') away from the
microchip, depending on microchip
type and orientation.
Storage temperature:
-10
C to +70
C (+14
F to +158
o
o
o
Operating temperature:
-5
C to +55
C (+23
F to +131
o
o
o
Working frequency:
134 kHz (RFID)
F)
o
F)
o

Publicité

Table des Matières
loading

Table des Matières