Adjusting The Grinding Unit; Checking The Water Hardness; Tips On Energy Saving - NEFF CV 7760 N Mode D'emploi

A djusting the grinding unit
The rotary selector (11) on the top of the
appliance adjusts the degree of grinding
from coarse to i ne as required.
11 11
Warning: Adjust the grinding unit
only while it is running. Otherwise
the appliance may be damaged.
1. Deploy the appliance fully (see
" D eployment system").
2. In the drink selection menu, select
.
E spresso
3. Press (6).
z
4. While the grinding unit is running, adjust
the rotary selector (11) from i ne to
coarse or back as required.
The new setting will not become
apparent until after the second cup
of coffee.
For dark roast coffee beans,
choose a i ner grind, for lighter
beans a coarser grind.
C hecking the water hardness
The water hardness setting can be adjusted
on this appliance. It is important to set the
water hardness correctly, so that the appli-
ance indicates accurately when the descal-
ing programme should be run. The factory
setting for the water hardness is 4.
Neff
C77V60N02_Heft1.indb 49
You can check the water hardness using the
enclosed test strip or by asking your local
water supplier.
Dip the test strip briel y in water, gently
shake off any drips, and check the result
after one minute.
Water hardness levels and settings:
Level Water hardness
German (°dH) French (°fH)
1 1 - 7
2 8 - 14
3 15 - 21
4 22 - 30
T ips on energy saving
X
The fully automatic espresso machine
switches to "energy saving mode" auto-
matically after one hour (factory setting).
The appliances uses very little power
when in "energy saving mode", but moni-
tors all safety-relevant functions so as to
avoid damage. The default time of one
hour can be shortened (see "Auto off
after" under "Displaying settings"). The
appliance then uses even less power.
X
The appliance is put into "energy saving
mode" by retracting the navigation button.
X
If the appliance is not being used, switch
it off at the power switch.
X
If possible, do not interrupt coffee or milk
froth dispensing. Stopping a process
prematurely results in higher energy con-
sumption and the drip tray i lls up more
quickly.
X
Always descale the appliance when
Service - descale
"Descaling") to avoid a build-up of lime-
scale. Limescale residue results in higher
energy consumption.
English | 49
1 - 13
14 - 25
26 - 38
39 - 54
is displayed (see
C77V60N2 | 11/2011
28.11.2011 16:34:33