Deployment System - NEFF CV 7760 N Mode D'emploi

38 | English
Retracted: The appliance is in "energy sav-
ing mode". After the appliance has been
switched to "energy saving mode" it rinses,
unless coffee has not been dispensed.
The appliance is ready for use when the
drink selection menu is shown in the display
(3). Press the navigation button in the re-
quired direction to enter or change settings
(e.g. coffee strength or per-cup quantity).
Even when in "energy saving
mode" the appliance recognizes
when the drip tray unit (18) has
been removed.
5 Z : This button is used to navigate
d ownwards in the display (3). The current-
ly active menu item is shown in a larger
font.
6 S tart/Stop z
start drink preparation or to start a s ervice
programme.
Press z (6) again during drink prepara-
tion to stop the dispensing process.
D eployment system
The appliance can be pulled out of the built-
in unit automatically. To do this,
X
press deployment button (16) (appliance
must be switched on for this) or
16
Neff
C77V60N02_Heft1.indb 38
: This button is used to
X
remove grate and pull on the handle un-
derneath which is now accessible:
The appliance now moves automatically into
deployment position 1. In this position it can
be i lled with water, coffee beans, ground
coffee and cleaning / descaling tablets, and
the accessories on the right of the appliance
can be removed.
To pull the appliance out fully,
X
press deployment button (16) again and
pull the appliance out by hand into posi-
tion 2 or
X
pull the appliance out fully by the handle.
In deployment position 2 the brewing unit
can be removed and the grinding unit
adjusted.
Deployment
position 1
Then push the appliance back fully into the
built-in unit.
During the brewing process, auto-
matic deployment is prevented.
Deployment
position 2
C77V60N2 | 11/2011
28.11.2011 16:34:26