How To Use - SELFSAT CARAVAN PLUS Manuel Utilisateur

2-2. How to Use

d. If the antenna does not find a satellite for 10 minutes, the antenna returns to its HOME position.
e. Want to search for satellites again, reboot the PI BOX.
2. Power off
a. Press POWER button
Press and hold the power button of the PI BOX for more than 2 seconds, the power is turned off
regardless of the state of the antenna.
b. Press HOME button
When the home button of PI BOX is pressed the antenna moves to the HOME position and the power
is automatically turned off after about 60 seconds (the POWER LED and the HOME LED will blink
alternately for 60 seconds)
c. Ignition Occurrred
When ignition occurs in the vehicle, the antenna automatically moves to the HOME position and
power off after 60 seconds. (If the PI BOX is turned off at this time, it will automatically turn on and
then perform the operation.)
WARNING
If the PI BOX is powered off and the vehicle is moved while the antenna is not in the
HOME position, the antenna may be damaged.
Before moving the vehicle, first check the condition of the antenna, and turn off
after is fully folded to the HOME position.
1. Search satellites
HOME LED
When powered on by pressing the PI BOX's
POWER LED
power button, after about 10 seconds, the
antenna starts searching for pre-programmed
HOME button
or most recently received satellite.
POWER button
※ The pre-programmed satellite is ASTRA1,
which can be changed to the desired
satellite via the APP
Fixed hole
a. When the antenna is in the HOME position, it
starts searching for satellite.
b. When the antenna is pointing towards the
Power
satellite, it will not move.
to STB
c. When the antenna is in a different position
to unit
than in the case of a and b above, it first
moves to the HOME position and then starts
searching for satellite.
ENGLISH - 5