How To Prepare The Cable; How To Connect The Cable To The Antenna And The Set Top Box; Step 4: Antenna Pointing Menu - SELFSAT -H21D Manuel Utilisateur

A) How to prepare the cable?
15mm
8mm
3mm
C) How to connect the cable to the antenna and the set top box?
To Antenna
Cable
It is important that the coaxial cable does not become damaged or Kinked
during the installation procedure.

Step 4: Antenna Pointing Menu

Once all connected, turn on the TV and the
Satellite receiver.
Select the Antenna Pointing Menu on your set
top box.
This image shows the Signal level and the
screen you will see on your TV.
Do not forget to choose "LNB : ON"
You will need someone to stay in front of the TV
to tell you when the signal is "good" while
you're outside trying to adjust the antenna the
best way possible.
CONNECTOR COVER
F CONNECTOR
One side
www.self-sat.com
Other side
To receiver
Antenna Pointing Menu
Satelite : ASTRA 1
Transponder : 23
LNB : ON
Polarisation : Horizontal
Frequency : 12640
Signal: 0
10