SELFSAT CARAVAN PLUS Manuel Utilisateur page 19

23
Apply silicone around cable holder and on the
top of screws for waterproof
25
Prepare the power input cable to connect the
battery and PI BOX
27
STB
Fix the PI BOX in an appropriate place using two(2) M4x20 screws, and connect the power cable
and PI cable
24
Connect cables to the ports of the antenna,
remove masking tape and tidy silicone before
dry
26
Match the power input cables polarities to the
battery polarities, red to red / black to black
and white cable to ignition port of vehicle
approx.1.5m
ENGLISH - 18
Ignition
12V DC