Table Des Matières; Introduction - McCulloch MTO002 Manuel D'utilisation

Introduction..................................................................... 6
Safety..............................................................................7
Assembly........................................................................ 9
Maintenance................................................................... 9
Product description
We have a policy of continuous product development
and therefore reserve the right to modify the design and
appearance of the products without prior notice.
Intended use
WARNING: Use this attachment only with
products that it is intended for. Refer to the
accessory chapter in the operator's manual
of your product.
Attachment overview
(Fig. 1)
1. Blade guard
2. Shaft
3. Blades
4. Split pin
5. Gear housing
6. Operator's manual
Symbols on the product
(Fig. 2) Careless or incorrect use of this attachment
can result in serious or fatal injury to the
operator or others.
(Fig. 3) Please read the operator's manual carefully
and make sure you understand the
instructions before using the attachment.
(Fig. 4) Wear approved head protection, hearing
protection and eye protection.
(Fig. 5) Always wear approved protective gloves.
(Fig. 6) Wear sturdy, non-slip boots.
(Fig. 7) Rotating blade. Keep hands and feet clear.
The arrow indicates the direction of rotation.
(Fig. 8) Rotating blade. Keep hands and feet clear.
The arrow indicates the direction of rotation.
6
Contents
Transportation, storage and disposal........................... 10
Technical data.............................................................. 10
Contents of the EC declaration of conformity............... 10

Introduction

Use the attachment for edging lawns only.
(Fig. 9)
(Fig. 10)
(Fig. 11)
(Fig. 12)
(Fig. 13)
(Fig. 14)
(Fig. 15)
Note: Other symbols/decals on the attachment refer to
special certification requirements for certain markets.
Watch out for thrown objects and ricochets.
Keep a minimum of 15 m / 50 ft distance to
persons and animals during operation of the
product.
Noise emission to the environment refer to
the European Community's Directive. The
emission of the product is specified in the
Technical data chapter and on the label.
The product agrees with the applicable EC
directives.
The product agrees with the applicable EAC
directives.
The product agrees with the applicable
Ukraine directives
The product agrees with the applicable
Australia and New Zealand electromagnetic
compatibility directives.
1037 - 001 - 21.02.2019