FujiFilm instax square SQ10 Guide D'utilisation page 35

9 Because your camera is software-controlled, there is the chance that on rare occasions it will malfunction.
If you experience incorrect operation, reset by removing the batteries and then reloading them after a while.
0 Note that the temperature range within which your camera can be used is +5°C to +40°C.
- Take great care to ensure that printed materials do not violate copyright, image rights, privacy or other personal rights
and do not off end public decency. Actions that violate the rights of others, are contrary to public decency or constitute a
nuisance may be punishable by law or otherwise legally actionable.
Cautions during printing
INSTAX SQUARE FILM AND PRINT CARE
See FUJIFILM Instant Film "instax SQUARE" for film use instructions. Follow all instructions for safe and proper use.
1 Keep the film in a cool and dry place. Do not leave the film in a place where the temperature is extremely high (e.g., in a
closed car) for many hours.
2 When you load a film pack, use the film as soon as possible.
3 If the film has been kept in a place where the temperature is extremely high or low, bring it to room temperature before
starting to print pictures.
4 Be sure to use the film before the expiration or "Use Before" date.
5 Avoid airport checked luggage inspection and other strong X-ray illumination. The effect of fogging, etc. may appear on
unused film. We recommend that you carry the camera and/or the film onto the aircraft as carry-on luggage. (Check with
each airport for more information.)
6 Avoid strong light, and keep the developed prints in a cool and dry place.
7 Do not puncture, tear, or cut INSTAX SQUARE film. If film becomes damaged, do not use.
Cautions on handling the fi lm and prints
For details, refer to the instructions and warnings on FUJIFILM Instant Film "instax SQUARE".
instax_D-SQ_6lang.indb 35 instax_D-SQ_6lang.indb 35
EN
35
2017/2/20 14:12:16 2017/2/20 14:12:16