Changing The Barrel Sleeve - Hämmerli LUFTPISTOLE AP20 Mode D'emploi

AP20
Air Pistol

5.6 CHANGING THE bARREL SLEEvE

The barrel sleeve is a changeable plastic tube that protects the exterior of the barrel from damage.
A variety of colors are available to suite individual preferences.
a
1
1 Setscrew with centering point
2 Compensator
• Completely unscrew the setscrew (1) on the compensator (2).
• Pull the compensator forward (a).
• Pull the barrel sleeve (3) from the barrel (b).
• Press the new barrel sleeve onto the barrel up to a stop in the system housing (c).
• Press the compensator until the centering mark (4) is visible in the borehole.
• Screw the setscrew onto the compensator and tighten.
b
2 3
3 Barrel sleeve
4 Centering mark
26
c
4 3