Important Safety Instructions - DRILL DOCTOR 500X Mode D'emploi

IMPORTANT SAFETY INSTRUCTIONS

For Your Own Safety Read Instruction Manual Before
Operating Tool; Wear Eye Protection.
Precautions
When using electric tools, basic safety precautions should
always be followed to prevent the risk of fire, electric shock,
and personal injury.
• KEEP GUARDS IN PLACE and in working order.
• KEEP WORK AREA CLEAN. Cluttered areas and bench
invite accidents.
• DO NOT USE IN DANGEROUS ENVIRONMENT. Do not
use power tools in damp or wet locations or expose them
to rain. Keep work area well lit. Do not use tools in the
presence of flammable liquids or gases.
• KEEP CHILDREN AWAY. All visitors should be kept safe
distance from work area.
• MAKE WORKSHOP KID PROOF with padlocks, master
switches, or by removing starter keys.
• DO NOT FORCE THE TOOL. It will do the job better and
safer at the rate for which it was designed.
• USE THE RIGHT TOOL. Don't force tool or attachment to
do a job for which it was not designed.
• USE PROPER EXTENSION CORD. Make sure your
extension cord is in good condition. When using an exten-
sion cord, be sure to use one heavy enough to carry the
current your product will draw. An undersized cord will
cause a drop in line voltage resulting in loss of power and
overheating. The Drill Doctor
(.4 ampere in E.U; .74 ampere in Japan). Therefore, when
choosing an extension cord, please select cords of the fol-
lowing gauge:
—a 25 foot cord must be at least 18 gauge
—a 50 foot cord must be at least 16 gauge
—a 100 foot cord must be at least 14 gauge
—a 150 foot cord must be at least 12 gauge
If in doubt use a heavier gauge. The smaller the gauge
number, the heavier the gauge.
• WEAR PROPER APPAREL. Do not wear loose clothing,
gloves, neckties, rings, bracelets, or other jewelry which may
2
® has a 1.75 ampere rating
www.drilldoctor.com