Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS
Vertical Baby Changing Station Surface Mounted
Model Numbers KB101 and KB111-SSWM
Step 1.
Remove changing station from the shipping container and check for any freight
damage. Identify the best location for installing the unit. Hold the unit in place
and open the bed. Make sure you have taken the operating clearance into
consideration.
Step 2.
Determine the best method of mounting based on the type of wall. You may have
left over hardware when you have finished installation.
Step 3.
The vertical unit has four mounting holes provided in the back wall, positioned on
a 16" (406 mm) stud center.
If possible, locate the wood or metal wall studs for fastening the unit in the desired
location. If the walls do not have studs on center as outlined, make sure at least
one side of the unit is installed into the stud.
2
Publicité
