Publicité
Les langues disponibles
Les langues disponibles
Cleaning
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Clean out also the suction opening, dust bag/paper
pack mounting area and the dust stopper.
CAUTION:
•
Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
Wash the dust bag in soapy water when it is clogged
with dust and the cleaner power becomes small. Dry it
out thoroughly before use. An insufficiently dried bag
may cause poor suction and shorten the service life of
the motor.
NOTE:
•
Paper pack is a throw-away type.
When the sponge filter is clogged with dust, remove it
from the cleaner and then wipe it off or wash in water.
Removing and installing the sponge
filter
► 1. Sponge filter
To remove the sponge filter, remove the dust bag or
paper pack and then pinch and take it out.
► 1. Recessed wall
Press in the whole edge of the sponge filter against the
recessed wall inside the dust bag/paper pack mounting
area.
CAUTION:
•
After cleaning sponge filter, be sure to install
it on the cleaner. If washed in water, dry it up
before installing. An insufficiently dried sponge
filter may shorten the service life of the motor.
11 ENGLISH
1
1
Publicité
