Table des Matières
Publicité
CE PICTOGRAMS
P/N: EAL0413G13A
P/N: 8-23562A
6
Safety
INSTRUCTION: Safety Label
Meanings
WARNING:
MAKE SURE THAT THE SAFETY SIGNS ARE
ALWAYS CLEARLY VISIBILE IN THE POSITIONS
INDICATED BY THE MANUFACTURER (SEE
FIGURE AT THE SIDE).
For any reset, use the Part Number (P/N) listed in
this charter.
EAL0413G13A
General Danger. Take the necessary precautions.
·
The areas marked with this symbol indicate the
presence of a potentional ranger to the operator.
·
This plate is normally found with a second
pictogram, which represents the type of risk in
greater detail. The operator must know the meaning
of every pictogram found on the machine.
·
When this symbol is found without other plate, it
notifies the operator of a general risk, refer to the
User Manual for the warnings.
·
Do not operate the machine without knowiong the
meaning of the pictogram found in the area
concerned.
·
Do not allow unauthorised people approach the
machine.
IN ORDER TO USE THE MACHINE THE OPERATOR
MUST KNOW THE MEANING OF ALL THE
PICTOGRAMS FOUND ON THE MACHINE.
8-23562A
Electrical risk. Electric shock hazard.
• • • • • Do not operate equipment with a damaged power cord
or if the equipment has been dropped or damaged,
until it has been examined by a qualified service
person.
• • • • • If an extension cord is necessary, a cord with a current
rating equal to or greater than that of the equipment
should be used. Cords rated for less current than
the equipment can overheat.
• • • • • Unplug equipment from electrical power outlet when
not in use. Never use the cord to pull the plug from
the outlet. Grasp plug and pull to disconnect.
• • • • • Do not expose the equipment to rain. Do not use on
wet surfaces.
• • • • • Plug unit into correct power supply socket.
• • • • • Do not remove or bypass grounding wire.
CONTACT WITH HIGH VOLTAGES CAN CAUSE
DEATH OR SERIOUS INJURY.
IMPORTANT!! SAVE THESE
INSTRUCTIONS
Operator's Manual
Pegasus 200
Publicité
Table des Matières
