Consommables; Support Pour Cartouches D'extraction; Tubes D'échantillons En Verre Et Cartouches D'extraction - Buchi Fatextraxtor E-500 Manuel D'utilisation

BÜCHI Labortechnik AG
14.2.4
14.2.5
14.2.6
Manuel d'utilisation FatExtractor E-500
Cooling water valve. 24VAC
Valve opens cooling water feed during distillation.
Meant to be used with a vacuum controller/interface.
Extension cable for the cooling water valve, 2 m
Turning disk
Allows for turning the instrument for easier access.
StatusLight cpl., incl. communication cable
Indicates the status of the instrument (instrument is
ready to use, has an error or is in operation).
Funnel

Consommables

Quartz sand 0.3 - 0.9 mm, 2.5 kg
Celite® 545, 1 kg

Support pour cartouches d'extraction

Set of holders for glass sample tubes with frit, PTFE, 3 pcs.
Set of holders for LSV glass sample tubes, PTFE, 3 pcs.
Holders for thimbles d25, PTFE, 3 pcs.
Holders for thimbles d33, PTFE, 3 pcs.
Holders for thimbles d43, PTFE, 3 pcs.
Tubes d'échantillons en verre et cartouches d'extraction
Glass sample tubes with frit, 6 pcs.
Glass sample tubes LSV with frit, 6 pcs.
Extraction thimbles 25 x 100 mm, 25 pcs.
Extraction thimbles 33 x 94 mm, 25 pcs.
Réf. article
031356
11069477
11067985
11068959
11067473
Réf. article
037689
11068920
Réf. article
11067485
11067486
11067488
11067490
11067491
Réf. article
11067497
11067814
018105
11058983
Annexe | 14
Schéma
Schéma
87/90