Parts List - CERTIFIED 060-0181-8 Guide D'utilisation

PARTS LIST

PERSONAL SAFETY
• Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
Carefully remove the machine from its packaging and check that the following parts are included:
a power tool while you are tired or
under the influence of drugs, alcohol
A. Lawn mower body
or medication. A moment of inattention
B. Middle handle
while operating power tools may result in
C. Upper handle
serious personal injury.
D. Quick clamps (4 pcs)
• Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing
D
protection used for appropriate
conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure
E
the switch is in the off-position before
connecting to power source and/or
F
battery pack, picking up or carrying
the tool. Carrying power tools with your
finger on the switch or energising power
tools that have the switch on invites
accidents.
• Remove any adjusting key or wrench
C
before turning the power tool on.
A wrench or a key left attached to a
rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in WARNING!
unexpected situations.
• If any parts are damaged or missing, do not operate this tool until the missing parts are replaced.
Failure to heed this warning could result in serious personal injury.
• Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
NOTE:
parts. Loose clothes, jewellery or long
• Always recycle the packaging in accordance with local recycling schemes.
hair can be caught in moving parts.
• If devices are provided for the
connection of dust extraction and
WARNING!
collection facilities, ensure that these
• This item requires a two person lift to remove from the packaging. Make sure that you have sufficient
are connected and properly used. Use
space to put the lawnmower down. Keep your feet apart so that you have a stable position, bend at
of these devices can reduce dust-related
the knees and keep your back straight.
hazards.
POWER TOOL USE AND CARE
• Do not force the power tool. Use
the correct power tool for your
application. The correct power tool will
do the job better and more safely at the
rate for which it was designed.
E. Cord holder (1 pc)
F. Cable clip (2 pcs)
• Do not use the power tool if the switch
G. Collection bag
does not turn it on and off. Any power
tool that cannot be controlled with
the switch is dangerous and must be
B
repaired.
• Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive
safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power
tool. Power tools are dangerous in the
hands of untrained users.
• Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tool's operation. If damaged, have
the power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
• Use the power tool, accessories, tool
bits, etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
G
A
Fig. 2
5 5