CERTIFIED 060-0181-8 Guide D'utilisation page 5

4 4
model no. 060-0181-8 model no. 054-8289-8
KNOW YOUR LAWN MOWER
SAFETY GUIDELINES
KNOW YOUR TOOL
To operate this tool, carefully read this
Instruction Manual and all labels affixed to
the Corded Jigsaw before using. Keep this
manual available for future reference.
IMPORTANT
This tool should only be serviced by a
qualified service technician.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
WORK AREA SAFETY
No. Part
• Keep the work area clean and well lit.
Cluttered or dark areas invite accidents.
1 Mower body
• Do not operate power tools in
Adjusting lever for cutting height
2
explosive atmospheres, such as in the
presence of flammable liquids, gases
Collection bag
3
or dust. Power tools create sparks,
Collection bag cover
4
which may ignite the dust or fumes.
Full collection window
5
Upper handle
6
WARNING!
Wheel
7
• Safety symbols in this instruction manual are used to flag possible dangers. The safety symbols
and their explanations require your full understanding. The safety warnings do not, by themselves,
eliminate any danger, nor are they substitutes for proper accident prevention measures.
• This safety alert symbol indicates caution, warning, or danger. Failure to obey a safety warning
can result in serious injury to yourself or others. To reduce the risk of injury, fire, or electric shock,
always follow the safety precautions.
I
contact us: 1-844-428-7277
11
11
13 13
10
10
9
9
8
8
• Keep children and bystanders away
while operating a power tool. Distractions
can cause you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
• Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
• Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric
shock.
• Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
7
7 heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
• When operating a power tool outdoors,
No. Part
use an extension cord suitable for
outdoor use. Use of a cord suitable for
8 Lower handle
outdoor use reduces the risk of electric
9 Middle handle
shock.
• If operating a power tool in a damp
10 Quick release lever
location is unavoidable, use a ground-
11 Switch box
fault circuit interrupter (GFCI)
protected supply. Use of a GFCI reduces
12 Switch bar
the risk of electric shock.
13 Power cord
12 12
6 6
5
5
4
4
3
3
2
2
1 1
Fig. 1