LG LCW-004 Manuel Du Propriétaire page 77

4
Place the new filter inside of the cover with
the side that says FRONT facing outward.
5
Align tabs on the filter cover with hooks
on the refrigerator wall.
6
Rotate the air filter cover clockwise until the
hooks engage and the cover locks in place.
7
Press and hold the Pure N Freshbutton on
the control panel for 3 seconds to reset the
filter sensor.
NOTE
• Be careful not to catch your finger when
mounting the filter. Doing so may result in
injuries or malfunctions.
• If the replacement period has passed, the
bacteria and odor removal performance may
deteriorate.
• Note that if you wash the filter with water, the
filter performance may also deteriorate.
• Caution should be taken not to change the
direction of the filter to be inserted into the
filter cover.
• When setting the appliance to On or Power
mode after replacing the filter, check if the
LED lamp near the filter is on.
• The filter can be purchased from an LG
Electronics customer information centre.
EN
35