Joyello JL-983 WROOM Mode D'emploi page 20

GB
INSTALLATION WITHOUT BACK SEAT (Only base / backsplash)
Groups II and III
Group II: 15 kg-25 kg
Group III: 22 kg-36 kg
1. Hold the base with one hand; push the backrest backwards (fig. 19).
2. Hold the base with one hand, pull the backrest, with the other hand (Fig. 20/21)
3. Place the forward-facing child seat in the car, on the positions allowed in the car (fig. 22)
4. After placing the child, pull the car belts to 3 points (lap and diagonal) by means of the buckle.
Under the arms, pull the abdominal seat belt and over the child's shoulder, pull the diagonal, not
twisting them. Put the car seat buckle into the lock mechanism until you hear the locking "click". (fig. 23)
CLEANING AND MAINTENANCE
To remove the seat cover, you need to unhook the straps from the lower metal buckle, pull the
harness, and carefully remove the coating from both the base and the back (fig. 24-25)
The cover is removable and washable at 30°C. The harness belt system and plastic component can
be washed by warm water. • Cleaning of the cover: use only neutral detergent and wash with hot
water. Do not machine wash. Spinning cycle and dryer are not recommended.
20