Joyello JL-983 WROOM Mode D'emploi page 17

2. Pull the car belt to 3 points (lap and diagonal) by means of the buckle, through the appropriate
slots / guides in the rear of the seat, as in fig.2.
Make sure the car seat belts are not twisted and that they are flat.
Press the seat against the back of the car seat while
you pull the car belt buckle diagonally and abdominally in order to eliminate flexibility,
insert the buckle into the car's seat belt locking mechanism
until you hear a distinct locking "click". (Fig.2)
NOTE:
a. Before anchoring the seat, make sure
that the backrest of the rear car seat is in
the upright position, if adjustable
b. The backrest of the seat must adhere to
the seat of the car, leaving as little space
as possible.
3. Press the button to adjust the seat belt with one hand, and
then pull forward seat belts, including covers, with the other
hand in order to loosen (Fig. 3).
GB
17