Before Using Your Fridge; How To Operate The Appliance; Thermostat Setting - VESTEL VEKF3015 Guide D'utilisation

Before Using your Fridge

• When it is operated for the first time or after transportation, keep
your fridge in the upright position for 3 hours and plug it on to
allow efficient operation. Otherwise, you may damage the
compressor.
• Your fridge may have a smell when it is operated for the first time; the smell will fade
away when your fridge starts to cool.
PART 2.

HOW TO OPERATE THE APPLIANCE

Thermostat Setting

• Thermostat automatically regulates the inside temperature of the refrigerator
compartment and freezer compartment. By rotating the knob from position 1 to 5,
colder temperatures can be obtained.
• The " 0 " position shows thermostat is closed and no cooling is available.
• For short-term storage of food in the freezer compartment, you can set the knob
between minimum and medium position (1-3).
• For long-term storage of food in the freezer compartment, you can set knob medium
position.(3-4)
• Note that; the ambient temperature, temperature of the freshly stored food and
how often the door is opened, affects the temperature in the refrigerator and
freezer compartments. If required, change the temperature setting.
• When you first switch on the appliance, you should ideally try to run it without any food
in for 24 hours and not open the door. If you need to use it straight away, try not to put
much food inside.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before
restarting in order not to damage the compressor.
• REFRIGERATORS (with 4 star rating): The freezer of the refrigerator cools down to
-18°C and less.
• LARDERS (without star rating): Larders (coolers) have not any freezer compartment
but can cool down to 4-6°C.
• This appliance is designed for use at an ambient temperature within the 16°C - 32°C
range.
EN - 27 -