Height Adjustment; Fill Quantity - Bosch THD20 Série Notice D'utilisation

18
► Set the on/off switch to on. All display
items will light up briel y, and then the L
icon stays lit.
► Place a glass or cup holding at least
150 ml on the cup stand under the
water outlet.
► Press the start/stop button to dispense
one portion of water to rinse the
appliance.
Note: Before using the appliance for the
i rst time or after a long period of non-use,
do not drink the i rst glass of water.
The machine is now ready to use.
Dispensing water
► Set the cup stand to the appropriate
height for the cup or glass.
► Place the cup or glass under the water
outlet.
► Press the temp. set button to select the
desired temperature.
► Press the start/stop button. The water
will dispense from the outlet. The
selected temperature l ashes while the
water is dispensed.
Robert Bosch Hausgeräte GmbH
Filtrino_H1_all_languages.indd 18
H eight adjustment
The adjustable cup stand lets you adjust
the distance between your cup or glass and
the water outlet. The lowest setting is suit-
able for taller glasses and cups. For smaller
cups or soup cups you can insert the cup
stand into one of the upper openings.
Important: Don´t use the appliance without
cup stand.
F ill quantity
The appliance ships with a preset i ll
quantity of 120 ml. You can change this
quantity.
To adjust the i ll quantity, proceed as
follows:
► Select any temperature (for example,
90 °C).
► Turn the appliance off with the on/off
switch.
► Press and hold the start/stop button.
► Turn the appliance on with the on/off
switch. The indicator for the currently
set i ll quantity l ashes.
► Press the temp. set button to select the
desired i ll quantity:
L
= approx. 120 ml
70 °C = approx. 150 ml
80 °C = approx. 200 ml
90 °C = approx. 250 ml
Q
= approx. 300 ml
► Release the start/stop button – the
setting is now stored.
en
01.08.2011 10:52:08