Invacare Stileo H171 Manuel D'utilisation page 2

Invacare® Stileo
1.2 Symbols in this user manual
In this user manual, warnings are marked with symbols. The title next
to the warning symbol indicates the level of danger.
WARNING
Indicates a dangerous situation which could lead to
death or serious injury if not avoided.
IMPORTANT
Indicates a dangerous situation which could lead to
damage if not avoided.
Useful tips, recommendations and information to
ensure efficient and smooth operation.
This product complies with the directive 93/42/EEC
for medical products. The launch date for this product
is specified in the CE declaration of conformity.
Manufacturer
1.3 Intended use
The suction grab bars were designed to support natural movement
and not to bear the full body weight of the user. They are intended
for short-term use, e.g. on journeys or as a temporary solution after
a hospital stay. Any other use is prohibited.
1.4 Scope of delivery
•
Suction grab bar
•
User manual
1.5 Warranty
We provide a manufacturer's warranty for the product in accordance
with our General Terms and Conditions of Business in the respective
countries. Warranty claims can only be made through the provider
from whom the appliance was obtained.
1.6 Standards and regulations
Quality is of the utmost importance for our company; all processes
are based on the ISO 9001 and ISO 13485 standards.
This product features the CE mark, in compliance with the Medical
Device Directive 93/42/EEC Class 1.
Invacare® is continuously working towards ensuring that the
company's impact on the environment, locally and globally, is reduced
to a minimum. We only use REACH compliant materials and
components.
For further information please contact Invacare® in your country (for
addresses, see back page of this manual).
1.7 Service life
The expected service life of this product is five years when used daily
in accordance with safety instructions and intended use, stated in this
manual. The effective service life can vary according to frequency
and intensity of use.
2 Safety
2.1 Safety information
WARNING!
Risk of falling!
On unsuitable surfaces, the suction grab bar may not
achieve the required suction force and may as a result
suddenly be detached from the surface.
– Only use the suction grab bar on smooth, non-porous
and firm surfaces, which are clean and dry, steamproof
and imperviously sealed.
– Never attach a suction grab bar on a joint.
2
WARNING!
Risk of falling!
– Do not use if defective.
WARNING!
Risk of falling!
Through ageing, incorrect installation or as a result of a
dry construction method, it is possible that the adhesive
force of tiles and surface materials may be insufficient. For
this reason, the prepared surface may become detached if
load is applied to the correctly mounted suction grab bar.
– Check the stability of the prepared surface before using
the suction grab bar for the first time.
WARNING!
Risk of falling!
Different ambient conditions can reduce the suction
force.
– Only use the suction grab bar at temperatures below
40 °C and up to a maximum altitude of 1000 m above
sea level.
– Do not expose the suction grab bar to direct sunlight
for prolonged periods.
– Never attach a suction grab bar to a window.
WARNING!
Risk of falling!
Excessive or intermittent loads can lead to spontaneous
loss of suction force.
– Before using the suction grab bar, check the suitability
for the relevant user and his/her usage behavior.
– The maximum load that can be applied to the suction
grab bar is 30 kg.
2.2 Labels and symbols on the product
Identification label (Fig. 1)
A Conformity mark
B Lot number
C Maximum safe load
D Read user manual
E
Product designation
Warning label
Warning label for safe usage. Refer to
hazard statements in chapter 3.1 Installing the
suction grab bar (Fig. 3), page 2 .
3 Setup and usage
3.1 Installing the suction grab bar (Fig. 3)
The suction grab bar can be installed on sealed and smooth surfaces.
WARNING!
Risk of falling!
Incorrect mounting may lead to the suction grab bar
becoming suddenly detached from the surface. The check
display on the suction grab bar allows the user to check if
it is mounted correctly (it is not a vacuum display!).
– Ensure that the suction grab bar is undamaged, oil, dust
and dirt-free before installing.
Release both folding levers A.
1.
2. Press and hold the suction grab bar equally with both suction
pads B against a suitable surface.
3. Close both folding levers.
1526478-C