Philips FC8138 Mode D'emploi page 8

English
8
2 To disconnect the hose, press the release buttons (1) and pull the
hose connector out of the hose connection opening (2).
telescopic tube
1 To connect the tube to the handgrip of the hose, insert the narrow
section into the wider section while turning a little.
To disconnect the tube, pull while turning a little.
2 Adjust the telescopic tube to the length you find most comfortable
during vacuuming. Press the slide on the tube (1) and push the lower
tube part downwards or pull it upwards (2).
Combination nozzle
You can use the combination nozzle on carpet (with the brush strips
folded in) or on hard floors (with the brush strips folded out).
- To clean hard floors, push the rocker switch on top of the combination
nozzle with your foot to make the brush strips come out of the nozzle
housing.