Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting

Problem
No power when POWER is switched on
EN
The location of music is not correct
No sound
Huming noise on speaker
Remote control doesn't work
14
Cause
1. Mains plug not inserted correctly
2. The fuse is broken
L and R input or output are reversed or positive and
negative of speaker terminal is reversed
1. Volume control is set to minimum
2. Source Selector set to wrong source
3. Speakers not connected
1. Signal cables not correctly connected
2. The signal cable or power supply cord are placed
too closely
1. The battery protection plastic slip has not been
removed
2. The battery is empty
Remedy
Plug in securely
Replace the fuse with a new one of the same type
Reconnect correctly
Turn up the volume
Check Selector
Check speaker cables
Replace the signal cable with anoder one
Put the connections in good order. Keep the signal
cable away from the others
Remove the plastic slip
Replace the battery

Publicité

Table des Matières
loading

Table des Matières