Back Panel; Connecting The Inputs; Digital Inputs - Wadia INTUITION 01 Mode D'emploi

EN
1 2 3

Back Panel

1 USB input
2 Toslink digital input
3 D-link 1 – ( I2S - LVDS )
4 D-link 2 – ( I2S - LVDS )
5 AES/EBU digital input
6 S/PDIF input 1
7 S/PDIF input 2
8 Analog input 1
9 Analog input 2
10 Power inlet
11 Speaker output
10
+ -
4 5 6-7 8 9 10 11
Connection to the inputs
Do not apply electrostatic discharges accidentally to the apparatus inputs or
outputs. To prevent this from occurring, touch any earthed surface, even the Wadia
+ -
Intuition 01 casing, before connecting or removing a cable. It is unlikely that a
static shock will damage the unit, but it may cause some input circuits to "lock-
up". The inputs and outputs can be connected safely to the apparatus only when it
is switched off.

Digital inputs

The Wadia Intuition 01 has 7 digital inputs on the back panel.
• 1 USB Input: Use a USB cable from a desktop or laptop computer.
• This input accepts a sample rate up to 32-bit/384kHz and DSD 64/128 files.
• 1 TOSLINK Optical Input: Use a TOSLINK optical cable from a digital source. DVD
player or Laptop computer with optical output.
• 2 D-Link inputs : These are digital I2S LVDS inputs where you can connet sources
with the same format.
This is also a preferred Wadia to Wadia connection protocol.
The I2S LVDS format is not a confirmed standard but a protocol that is
in continual development, therefore its compatibility or correct opera-
tion with sources that have this data format is not guaranteed. These
inputs are to be preferred for connecting Wadia apparatuses with
D-Link outputs.
• 1 AES/EBU Digital Coax Inputs: This is the professional digital interface input.
We recommend using this input to connect a source that features an AES/EBU
output.