Cleaning And Storage - DS Produkte BG-E-00195 Mode D'emploi

EN
3. Place the shaver heads (1) on the skin and guide them
counter to the direction of hair growth. Tip: Use your free
hand to smooth down the skin to obtain the cleanest pos-
sible result.
4. After use, press the
the device.
5. Clean the shaver heads after each use (see the "Cleaning
and Storage" chapter).
6. Charge the battery when the light fl ashes (see the "Charg-
ing Up the Battery" chapter).

Cleaning and Storage

PLEASE NOTE!
■ No liquid must be allowed to enter the device. Never im-
merse the device in water!
■ The device must be switched off during cleaning.
■ Do not use any corrosive or abrasive cleaning agents!
1. Press the release button (7) and fl ip open the collecting
container (2). Dispose of the hair which is collected in it.
2. Use the cleaning brush to thoroughly brush out the collect-
ing container and the shaver heads (1).
3. Flip the collecting container shut. It must engage.
4. Wipe down the housing of the device if necessary with a
slightly damp cloth. Then dry it thoroughly.
5. Place the protective cap on the shaver heads.
6. Store the device out of the reach of children and animals in
a dry, clean, cool but frost-free place.
20
On / Off switch again to switch off