F.Bertazzoni REF30PIXL Notice D'installation page 22

Series: All
5
6
6,5 (¼")
Wall
or
furniture
22 ( ⁄ ")
A Connecting element
B Alluminium frame
20
Once completed the previous steps, push the units in their final posi-
tion
If the units are to be installed inside a niche or within an enclosed
structure, it is not necessary to have additional ventilation at the back
of the niche as North American units come with a factory installed
ventilation cap on top to prevent overheating. Always mount front
panels on door and drawer before pushing the unit into their final posi-
tion in the niche as the panels require additional clearance at the top
when being mounted.
Check the levelling of the appliance, adjusting its feet and wheels
to correct it.
cabinets through the side profiles
To make this operation easier keep the door and the drawer open.
7
Mount the aluminum trim covers onto the side profile trims by mating
with appliance face and niche ceiling and then sliding towards the
niche sidewalls
Press firmly until a click is heard. A wood block and mallet may be
needed to snap into place. Make sure not to damage the trims.
Side and central profiles mounting
6,5 (¼")
Appliance
A
D
E
B
44,4 (1 ¾")
.
5
Using the provided screws secure the appliance to the adjacent
.
7
6,5 (¼")
C
13 (½")
Appliance
D
D Connecting element
E Aluminium frame
.
6
6,5 (¼")
Wall
or
furniture
A
B
22 ( ⁄ ")