Thermador T18ID905RP Guide D'utilisation page 12

en-us Getting to know your appliance
Equipment
Shelf
You can remove and adjust the shelf:
Lift shelf and remove.
1.
When re-inserting, insert hooks on back of shelf
2.
at same height to make it level.
Insert shelf carefully to avoid scratching the
Note:
appliance.
Container
You can remove the container:
Press container to the rear,
■
lift the container at the rear and remove.
■
You can insert the bin:
Pull out the telescopic rails all the way.
■
Place the bin on the telescopic rails and push into
■
the appliance until it engages.
12
Ice pack
In the event of a power failure or a fault:
The ice pack delays the warming of stored frozen
■
food.
You can take out the ice pack to temporarily keep
food cool, e.g. in a cool bag.
Ice maker
9
CAUTION
DAMAGE TO THE APPLIANCE!
Never store bottles or food in the ice cube
container, even for short periods. This can
block and damage the ice maker.
Ice cube production starts as soon as the appliance
has reached the set temperature.
Notes
Ice cube production stops automatically when the
■
ice cube container is full.
When using the appliance for the first time,
■
discard ice cubes produced within the first
24 hours for hygiene reasons.
If you have stopped ice cube production for
■
several days, discard the first 30-40 ice cubes
produced for hygiene reasons.
Information about switching ice cube production on
and off
~ "Switching ice cube production on or off"
on page 15