Italiana Camini CLASSICA Installation, Usage Et Maintenance page 24

fi g. 1
A
G
fi g. 3
A
fi g. 5
INSTALLATION
A
fi g. 2 fi g. 2
I
H
fi g. 4
SMOKE OUTPUT
CLASSICA is designed for the connection of the fl ue at the
top, back of the stove.
Illustration 1 shows how the stove will appear once it has been
unpacked.
To connect the fl ue from the back it is necessary to remove the
elbow junction
To connect the smoke outlet at the top of the stove, proceed as
follows:
Remove the cast iron top (a – fi g. 2)
Fit the elbow connection to the smoke extractor unit vent (G -
fi g. 3) with the band provided.
AFTER COMPLETING THE CONNECTION OF THE
SMOKE OUTPUT PIPE TO THE FLUE, FIT THE CERA-
MIC SIDE PANELS AS SHOWN ON THE FOLLOWING
PAGE.
Remove the left cast iron from the top (H-Fig.4) replacing it
by the fl ue cover (I-fi g.4) provided, to allow the passage of the
pipe.
Before replacing the cast iron top (A – Fig. 5) removed
previously, apply the ceramic covering as illustrated on the
following page.
- 24
-