Safety - Simco-Ion ThunderION IQ 2.0 Notice D'utilisation

3 Safety

Warning:
 Work on the equipment must be carried out by a skilled and qualified electrical engineer
according to the applicable national and local regulations.
 The anti-static bar is only designed for neutralising electrostatically charged surfaces.
 When working on the equipment, always disconnect the power supply to the equipment.
 Make sure that the equipment is properly earthed (see installation).
Earthing is needed to ensure safe and proper operation.
 The emitters are sharp and can cause physical injury.
 High voltages are hazardous for people who have a pacemaker.
The high-voltage emitters (30 kV) are limited to a current of 150 µA, which means that they are
electrically safe to touch and shockproof.
Coming close or making contact with a emitter from one polarity can have the effect that a
person will become electrostatically charged and gets a shock reaction when the person
discharges to other earthed or uncharged objects (maintain a distance of at least 300 mm from
the bar).
When an overload occurs the high voltage will be regulated down until the max. internal current
level is reached.
 The concentration of ozone generated varies per application and must be checked.

If changes or modifications, etc. have been made without prior consent in writing, or if original
parts have not been used for repairs, CE/UL approval for the equipment will be withdrawn
and the equipment will no longer be under guarantee.
ThunderION2ThunderIONIQ2_UM_9752160050_NL_D_GB_F_V2_3
Active, but with an alarm
64