Aspire Nautilus 2 Manuel D'utilisateur page 37

35
Using the Device
Filling of E-Liquids
Screw the stainless steel sleeve from the
Nautilus 2 clearomizer. Fill the liquid side-
ways along the inner wall of the clearomizer
tank. The head's thread is the maximum
filling height, which must not be exceeded.
Screw the stainless steel sleeve back to the
clearomizers and sure that no e-liquid can
overflow and / or leak.
Please note the following:
Please refill the device with e-liquid when
the e-liquid level is less than 10%.