Edesa 4 SE Notice D'utilisation page 48

GB
1. PROGRAMME SWITCH
2. START BUTTON
3. ON-OFF BUTTON
4. POWER LED
5. PROGRAMME CHART
PROGRAMME SWITCH (1)
This is used to set the programme most suitable for the type of laundry and the degree
of drying desired.
The duration of the drying cycle is automatically determined by electronic control
irrespective of the programme selected. The humidity of the laundry is constantly
measured by sensors inside the drum. So it's normal for drying cycle times to vary
even for the same programme, as they depend on the type of laundry, the speed
of the washing machine's spin drying and the ambient temperature.
START BUTTON (2)
This is to start the machine when the desired programme has been set.
ON-OFF BUTTON (3)
This is to switch the dryer on and off.
POWER LED (4)
When on, this indicates that the dryer is connected to a power outlet.
CYCLE LEDS (6 - 7 - 8 - 9)
SAFETY DEVICES
This dryer has two safety devices:
•
an electric safety device that immediately stops the drum turning if the door is
opened during the drying cycle;
•
a thermal safety device that eliminates the risk of overheating.
C C O O N N T T R R O O L L P P A A N N E E L L
6. DELAYED START LED
7. DRYING LED
8. COOLING LED
9. ANTI-CREASE / END OF CYCLE LED
- 48 -