Olympus M.ZUIKO DIGITAL ED 12-100mm f4.0 IS PRO Mode D'emploi page 5

EN INSTRUCTIONS
Thank you for purchasing this Olympus product.
To ensure your safety, please read this
instruction manual before use, and keep it
handy for future reference.
Name of parts
1 Lens hood
2 Distance indicator
3 Focus ring
Changing focus methods (Fig. 1)
Change between AF/MF by sliding the focus ring.
• Position in which distance indicator cannot be
seen AF/MF
You can switch between AF/MF by using the
camera's settings.
• Position in which distance indicator can be
seen MF
Autofocus is not available; focus by rotating
the lens focus ring.
4 Mount index
5 IS switch
6 L-Fn button
IS switch
ON: Stabilizing functions in the lens and
camera operate. The IS operates
according to the IS setting in the camera.
OFF:Stabilizing functions in both the lens and
camera are off.
• About the stabilizing functions
Please use the latest firmware for the camera.
Operation of this function will change in the
following cameras. For more information,
please visit our home page.
E-M5, E-M10 series, E-P series, E-PL series,
E-PM series
Contact the other manufacturer to mount the
lens on another manufacturer's digital camera.
L-Fn button
The AF stops functioning while the button is
pressed.
Attaching the hood (Fig. 2)/
Storing the hood (Fig. 3)
To remove the hood, rotate it while pressing the
release.
7
EN