Weidmüller WAVECONTROL VMR 1ph Notice D'utilisation page 21

3.3.2 Table of settings options for WAS2 VMR 3ph
Input 1 2 3 4
on
Three phase 80Vac/dc...250Vac/dc
Single phase 200Vac/dc...400Vac/dc
Limit value
on
Setting at the upper operating point
Setting at the lower operating point
Hysteresis
on
Hysteresis, small
Hysteresis, large
Fault tolerance
on
Working current method
Closed-circuit current method
19