Publicité
Les langues disponibles
Les langues disponibles
Before Using the Stand Mixer
●
Before assembling the appliance, remove and safely discard any packaging material.
Mixing
●
Wash the
soapy water with a soft cloth then rinse and dry.
Using the Stand Mixer
1.
Speed Control
Set the
Note: If the Speed Control is not at 0, the machine's safety feature will be triggered and it
will not activate when switched on. If this happens, see Safety Instructions for how to get
the appliance running.
2.
Press and hold the
the head in this position.
3.
Fit the
Mixing Bowl
place. Make sure the bowl is locked securely before going any further.
4.
Splash Guard
Fit the
guard to the open padlock symbol on the head. Turn the splash guard clockwise so the
arrow points to the closed padlock symbol to lock it into place. Make sure it is locked
tightly before going any further.
5.
Chose the
Mixing Attachment
6.
Line the grooves on the attachment up with the attachment shaft and then press the
attachment in while turning anti-clockwise to lock into place.
7.
Add your ingredients to the
not to mix more than 1.2kg each time and that when kneading dough the mix is roughly
2 parts flour to 1 part water.
8.
Press and hold in the Tilt Button to unlock the
position. Release the tilt button to lock it into place.
9.
Plug the power cord into the mains supply. This will make the
and flash blue.
10.
Turn the
Speed Control
that mixing is started at a lower speed to prevent splattering and then increased to suit
the recipe. Consult the
11.
To use the
Pulse
holding it in place for longer pulses. Do not use the pulse function for more than 30
seconds at a time.
12.
Occasionally stop the mixer during operation and scrape any mixture down the sides
Mixing Bowl
of the
13.
When mixing is complete, return the
appliance from the power supply.
14.
Mixer Head
Lift up the
in and rotating it clockwise.
SavistoStandMixer-Manual.indd 5
Bowl, Beater,
Dough Hook
to 0 before proceeding.
Tilt Button
and lift up the
into the groves on the mixer's base and turn clockwise to lock into
into the grooves on the
best suited for your recipe.
Mixing
Bowl, taking care not to overfill. It is recommended
clockwise to select a speed and start mixing. It is recommended
Mixing Guide
for example speeds.
function, turn the
Speed Control
with a spatula.
as described earlier and remove the
Whisk
and
attachments thoroughly in warm
Mixer
Head. Release the tilt button to lock
Mixer
Head, aligning the arrow on the
Mixer Head
and return it to the horizontal
anti-clockwise from the off position,
Speed Control
to the 0 position and unplug the
Speed Control
light up
Attachment
by pushing it
01/04/2016 12:08:37
Publicité
