Usb Mode - ready2music aurora+ Mode D'emploi

Logging on devices (Pairing)
Before using your speaker with a compatible device, such as a
mobile phone, for the first time, you must pair and connect it to
the device.
1. Ensure that the Bluetooth function is activated in your player
(e.g. mobile phone). For this, refer to the operation manual of
your player.
2. Short press the button repeatedly to select Bluetooth
/
mode, "BT" is shown & flashed on the display. It shows that this
unit is available to pair with other devices.
Pair the Speaker
1. If you haven't paired this unit with a device or the paired
devices list is empty, pairing mode is activated.
2. Activate Bluetooth on the compatible device, and set it to
search for compatible devices.
3. Select the speaker name "R2MAURORAPLUS" from the list of
found devices.
Tips: Only one playback unit can be connected to the speaker. If
the speaker is already connected to another playback unit, the
speaker will not appear in the BT selection list.
If your device asks for a passkey (depending on the device
manufacturers, model, and software version), then enter digits
"0000"(four zeros) and press OK.
If pairing has been carried out successfully, a voice prompt
"Bluetooth" will be heard, meanwhile, "BT" will stop flashing on
the display.
4. After connected completely, you can listen to music wirelessly-
through Bluetooth and select music in Bluetooth device.
5. Short press /OK button to pause or resume playback.
6. Press " " button to skip to next track, or press "
the beginning of current track or previous track.
38
NOTES:
• Depending on the device manufacturer, you need to perform
• If there is an existing connection, press and hold the
• To be able to transfer audio data, Bluetooth needs to stay
• If a mobile phone on which you are playing music receives a
• The player will be disconnected when your device is moved
• If the device is moved beyond the operational range, when it
• If the connection is lost, follow the instructions above to pair
1. Connect your USB device to the unit.
2. Short press the
mode, "USB READING" appears on the display. The USB will
start playing automatically once the contents scanning is
finished.
• Press
• Press "
• To remove your USB device, simply stop the playback and
" button to
the registration (PAIRING) again to connect the devices
button for 3 seconds to break the current connection and
initiate pairing mode.
activated in your player, Observe the operation manual of
your player.
call, the music will be interrupted. The sound however is not
played back via the speaker. After you have ended the call,
the devices are connected to each other again and playback
continues.
beyond the operational range. If you want to reconnect your
device to this player, place it within the operational range.
is brought back, please check if the device is still connected
to the player.
your device to the player again.

USB MODE

button repeatedly to select the USB
/
/ OK button to pause or resume playback.
"button to skip to next track or press "
previous track.
gently unplug it from the connector.
EN
" button to
39