ready2music aurora+ Mode D'emploi page 18

How to re-do a full scan
To re-do a full scan, you may short press the MENU button to show
the menu and then press the
Manual Tune
As well as the normal method of scanning, you can also manually
tune to a particular channel/frequency. This can be useful for
adjusting your antenna to achieve the best possible reception and
scanning a particular channel to update the station list.
1. Press MENU button and then press "
submenu: MANUAL, press the
2. Press " " or " " to display a particular channel/frequency,
press / OK button to tune to that channel/frequency. The
display shows a live indication of the received signal strength
on the selected frequency. Adjustments to your antenna will be
manifested in the received signal strength displayed.
To Remove Stations That Are Listed But Unavailable
1. Press MENU button and then press "
submenu: PRUNE, press
option.
2. Press " " or " " to select "Y" and then press
confirm to prune.
Station Presets
The unit allows you to store up to 20 DAB stations for easy recall
at any time.
To Save a Station
1. If you have found the desired station, press MENU button and
then press " " or " " to show the submenu: PRESET STORE,
then press /OK button to enter.
2. Press " " or " " buttons to choose the preset memory
position, press the /OK button to confirm the settings.
34
/OK button to select „FULL SCAN".
" or " " to show the
/ OK button to enter.
" or " " to show the
/OK button to enter the Prune
/OK button to
To Recall a Station
1. Press MENU button during DAB mode and then press "
" to select the submenu: PRESET RECALL, then press
button to enter the preset memory selecting mode.
2. Press " " or " " buttons to select the preset station.
3. Press /OK button to choose and play the displayed station.
Now playing information
While a station is playing, the screen shows its name and DLS
(Dynamic Label Segment) information broadcast by the station
such as program name, track title and contact details. Long DLS
info, over 16 characters scrolls across the display.
Dynamic Range Compression (DRC)
This function reduces the difference between the loudest and
quietest audio being broadcast. Effectively, this makes quiet
sounds comparatively louder, and loud sounds comparatively
quieter.
Note: DRC only works if it is enabled by the broadcaster for a
specific station.
To Change The DRC Setting
Select MENU > DRC, then press
submenu.
Press " " or " " to select the available options: DRC off, high,
low.
DRC off: DRC is switched off.
DRC high: DRC is switched on; the default setting recommended
for noisy environment.
DRC low: DRC is set to half normal level.
" or "
/OK
/OK button to enter the DRC
EN
35