Kyocera DF-760 Manuel D'utilisation page 36

English
34
3
4
5
6
7
DF-760, MT-720, BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
Remove the staple cartridge holder A.
Open the cover plate (A) of the staple cartridge
holder A and remove any jammed staples.
Close the cover (A) plate of the staple cartridge
holder into its original position.
Re-install the staple cartridge holder. The staple
cartridge holder will click into place when it has
been inserted correctly.
Close the right cover (D8) and re-install the finisher
back into position on the machine.